Orders ship free · 30-day guarantee · Made in Orange, California
The Jobsite Cup Holder.com ← back to the jobsite page

The fit guide

Will yours fit? Here's the whole answer.

One spec, one desk-drawer test, and the exact measurements for the cups and cans people actually bring. Every number below is sourced — nothing is guessed.

Container bases 2 to 3 inches across settle in fully. The flexible fins accept slightly wider bases up to 3.15 inches — a snug fit that seats with a push. Under 2 inches sits too loose; over 3.15 doesn't seat.

The 10-second version

The fit test lives in the same tool bag as the tape measure.

your cup's base
lands in here
  1. Find a sticky note. A standard sticky note is 3 inches square, full stop — and that square happens to double as the fit test's ceiling.
  2. Set the thermos cup, the tumbler, whatever's actually on site today, on top of it. Look at the bottom, not the rim — tumblers taper and thermos lids flare, so the base is the only measurement that decides anything.
  3. Read the note. Base sits inside the square? It fits. Hangs off the edges? Too wide for the base. A small puck lost in the middle — under 2 inches? Too narrow.

No tape measure needed, and no trip to the store to check bottle diameters against a chart. Pull a sticky note off the pad in the truck, set down whatever's already going into the cup holder, and you'll know before the first cut of the day.

Fits — settles right in

Base 2 to 3 inches. Verified against manufacturer and retailer specs.

Red Bull 8.4 oz can2.08"
Simple Modern Trek 40 oz Tumbler2.14"
Alani Nu 12 oz slim can2.25"
Celsius 12 oz slim can2.25"
slim 12 oz seltzer can (White Claw style)2.26"
16 oz pint glass (standard mixing glass)2.38"
standard 12 oz beer longneck bottle2.41"
Monster Energy 16 oz can2.60"
Red Bull 16 oz can2.60"
Red Bull 12 oz can2.60"
Liquid Death 16.9 oz tallboy can2.60"
La Croix 12 oz can2.60"
Arizona 23 oz tall can2.60"
Topo Chico 12 oz glass bottle2.60"
Bang Energy 16 oz can2.60"
standard 12 oz aluminum can2.60"
Starbucks bottled Frappuccino 13.7 oz2.61"
Yeti Rambler 20 oz Tumbler2.75"
Yeti Rambler 30 oz Tumbler2.75"
Coke 20 oz plastic bottle2.86"
vitaminwater 20 oz bottle2.88"
Stanley 40 oz H2.0 FlowState Quencher Tumbler3.10"

Snug — the fins flex

Just over 3 inches. The flexible fins spread and these seat with a push — calibrated to 3.15 inches by the maker.

Owala FreeSip 24 oz3.12"
Stanley 30 oz H2.0 FlowState Quencher3.15"

Honestly, no

Bases over 3.15 inches don't seat. We'd rather tell you here than in a return.

Stanley IceFlow 30 oz Flip Straw Tumbler3.20"
CamelBak Chute Mag 32 oz3.31"
Yeti Rambler 26 oz Bottle3.38"
Ball regular-mouth Mason jar (16 oz)3.38"
Owala FreeSip 32 oz3.43"
Gatorade 28 oz squeeze bottle3.45"
Nalgene 32 oz Wide Mouth3.50"
Hydro Flask 32 oz Wide Mouth3.58"

The handle rule

Classic handled coffee mugs don't fit at any base size — the handle sits exactly where a fin needs to grip. Handle-less mugs and camp cups inside the range are fine. (Tall tumblers with high handles, like the Stanley Quencher, are fine too — their handles sit far above the fins.) Espresso cups sit under the 2-inch floor: too loose.

Where these numbers come from

One measurement decides every verdict below: a container base in the range of 2 to 3 inches settles in. Everything on this list — the site regulars and the ones that don't make it — follows from that single line.

Build your set →

Checkout lives at steadilabs.com, home of the company behind it.